A Level Math Revision

IAL M1 moments: exam questions with mark schemes

Moment of a force; equilibrium of a rod under parallel coplanar forces, including non-uniform rods and rods on the point of tilting.

Each question carries its marks, and its mark scheme sits under it: M marks for method, A marks for accuracy, B marks for a correct result on its own. Try the question on paper first, then open the solution and mark yourself the way an examiner would.

Edexcel IAL M1 Mechanics 1 · 10 questions · 36 marks · Equilibrium of Rigid Bodies, Calculating Moments, Tilting, equilibrium

Question 1

2 marks · warm-up

State the two conditions for a rigid body in equilibrium.

Show solution

∑F=0 (no net force)   B1. ∑M=0 about any point (no net moment)   B1.

Answer: ∑F=0 and ∑M=0.

Question 2

2 marks · warm-up

A force of 15 N is applied to a spanner at a perpendicular distance of 0.4 m from the nut. Calculate the moment of the force about the nut.

Show solution
  1. M1 for using the formula Moment=Force×perpendicular distance.
  2. A1 for calculating 15×0.4=6 N m.

Question 3

3 marks · standard

A force of 30 N acts at an angle of 30∘ to a lever of length 2 m. Calculate the moment of the force about the pivot at the other end.

Lever 2 m long pivoted at one end; a 30 N force at the other end at 30 degrees to the lever
Show solution
  1. M1 for identifying the perpendicular component of the force or the perpendicular distance: Fsin⁡θ×d or F×dsin⁡θ.
  2. M1 for substituting the values: 30×2×sin⁡30∘.
  3. A1 for evaluating to 30 N m.

Question 4

3 marks · standard

A uniform beam AB of length 6 m and mass 12 kg is supported horizontally by two vertical strings attached at A and B. Find the tension in the string at A.

Beam AB 6 m hanging from vertical strings at A and B
Show solution
  1. M1 for taking moments about B (or A) to eliminate one tension: TA×6=12g×3.
  2. M1 for rearranging to solve for TA: 6TA=36g.
  3. A1 for calculating TA=6g=58.8 N.

Question 5

4 marks · standard

A uniform plank of length 4 m and mass 15 kg rests horizontally on supports at A and B. A mass of 10 kg is placed at a point C on the plank. The reaction at A is 15g N and the reaction at B is 10g N. Find the distance AC.

Plank 4 m on supports at A and B with a 10 kg mass at a point C
Show solution
  1. M1 for taking moments about A: 10g×4=15g×2+10g×x, where x=AC.
  2. M1 for evaluating the moments: 40g=30g+10gx.
  3. M1 for cancelling g and isolating x: 10x=10.
  4. A1 for calculating x=1 m.

Question 6

4 marks · standard

A uniform bridge of length 20 m and mass 5000 kg is supported by two pillars at its ends, A and B. A stationary truck of mass 2000 kg is 5 m from A. Calculate the reaction at pillar B.

Bridge AB 20 m on pillars at A and B with a 2000 kg truck 5 m from A
Show solution
  1. M1 for taking moments about A: RB×20=5000g×10+2000g×5.
  2. M1 for evaluating the moments: 20RB=50000g+10000g=60000g.
  3. M1 for solving for RB: RB=3000g.
  4. A1 for calculating RB=29400 N.

Question 7

4 marks · harder

A uniform beam AB of length 6 m and mass 12 kg is held horizontally. It is supported by a vertical string at A and a pivot at C, which is 4 m from A. A mass of 4 kg rests at B. Find the tension in the string at A.

Beam AB 6 m held by a vertical string at A and a pivot at C (AC = 4 m) with 4 kg at B
Show solution
  1. M1 for taking moments about the pivot C: TA×4+4g×2=12g×1.
  2. M1 for calculating the individual moments correctly.
  3. M1 for rearranging to solve for TA: 4TA=12g−8g=4g.
  4. A1 for finding TA=g=9.8 N.

Question 8

4 marks · harder

A uniform rod of mass 6 kg and length 4 m is held horizontally. An upward force of 20 N is applied at end A. A single support is placed under the rod to keep it in equilibrium. Find the distance of this support from A.

Uniform rod 4 m with an upward force of 20 N at the end A
Show solution
  1. M1 for resolving vertically to find the reaction R at the support: R+20=6g.
  2. M1 for calculating R=58.8−20=38.8 N.
  3. M1 for taking moments about A: R×x=6g×2⟹38.8×x=117.6.
  4. A1 for solving x=3.03 m (to 3 s.f.).

Question 9

5 marks · harder

A uniform plank AB of length 8 m and mass 20 kg rests horizontally on two supports at C and D, where AC=2 m and DB=2 m. A man of mass 80 kg stands on the plank at the point E, between D and B. The plank is on the point of tilting about D. Modelling the man as a particle, find (a) the distance DE, (b) the reaction at D.

Plank AB 8 m on supports at C and D (AC = DB = 2 m); an 80 kg man at E between D and B
Show solution
  1. B1 for RC=0 when the plank is on the point of tilting about D.
  2. M1 for taking moments about D: 80g×DE=20g×2 (the weight of the plank acts 2 m from D on the other side).
  3. A1 for DE=0.5 m.
  4. M1 for resolving vertically: RD=20g+80g.
  5. A1 for RD=100g=980 N.

Answer: (a) DE=0.5 m; (b) RD=100g=980 N

Question 10

5 marks · harder

A uniform beam AB of length 10 m and mass 30 kg rests horizontally on supports at C and D, where AC=2 m and AD=7 m. A child of mass 40 kg walks along the beam from C towards B. Find the maximum distance the child can walk past D before the beam tilts.

Beam AB 10 m on supports at C (AC = 2 m) and D (AD = 7 m); a 40 kg child walking past D
Show solution
  1. M1 for identifying that tilting occurs about D, meaning the reaction at C becomes zero.
  2. M1 for taking moments about D: the child's clockwise moment equals the beam's anticlockwise moment.
  3. M1 for setting up the equation: 30g×(7−5)=40g×x, where x is the distance past D.
  4. M1 for simplifying: 60g=40gx.
  5. A1 for solving to find x=1.5 m.

Notes and worked examples: IAL M1 Moments. More M1 exam questions: Kinematics · Forces and Newton's Laws · Vectors · Dynamics of a Particle · Statics of a Particle · Momentum and Impulse.

Previous topic: Forces and Newton's Laws. Next topic: Vectors. Every IAL unit. Real papers to finish on: IAL M1 past papers.